Okayo GPA-560, User Manual

Page: 13 / 20

Pendant/Bodypack Transmitter EJ-5T
LCD screen will display current used volume level when press or (VOL.
1
~
3).
Select output power/Maximum available channels
1. On OFF mode, press SET and POWER button to enter into the selection mode.
2. LCD screen will display maximum available channels; 640 -664 MHz, 794-806
MHz and 863-865 MHz. Press or to select preferred channel.
3. Press SET button to confirm and select, or it will confirm in 5 seconds without
any keys pressed.
4. LCD screen will display Hi / Lo, press or to select preferred output power.
5. Press SET button to confirm and select or to wait for 5 seconds without any
keys pressed.
Volume switch
Charging mode
1. LED lights red when charging.
2. LED lights green when battery is fully charged.
3. When device is slot into a charger stand, will off the power.
4. Battery error: LED status lights red and flashes when charging,
LCD battery symbol lights flashes, and it caused by:
(1)The battery charge temperature is exceeded 60 C.
(2)The duration of charging time for charger stand is exceeded seven hours.
(3)The battery is defected.
o
Frequency synchronization
1. When power is on, it will synchronize frequency or switch off without receiving
audio signal when exceeded upto ten minutes. When synchronization, MUTE
indicator lights blue / flashes and LCD backlit lights up.
2. Press MUTE button when channel is displayed on screen, enter into the synch-
ronization mode or off without receiving audio signal exceeded upto twenty
seconds.
3. When succeed, it will switch to MUTE mode and LED lights red.
To reset mode, press / at the same time and switch the power on.
Others