ANT
AF OUT
LOW/HI
DC INPUT
12 15V/1A
2
AF OUT
LOW/HI
Setup Procedure
Signal Connections
1. Connect 6.3 mm mic jack from Unbalanced AF Output to
amplifier s MIC IN
and
set
“impedance”
at
“LOW”
.
Or
connect
6.3 mm mic
jack
from
“unbalanced
AF Output”
to
amplifier’s “LINE IN”
and
set
“impedance”
at
“HI”
. (
The
same
way can
be
applied
in
Single-channel Diversity Receiver
/
Dual-channel Receiver
.)
“
”
’ “
”
Amplifier
2. If using
XLR
mic
jack
connect
it
from
”Balanced AF Output”
to
amplifier’s “AUX IN”.
,
In order to prevent from the impedance from being too high thus producing
unexpected noise, please set “impedance”
at
"LOW”
if
you
are
connecting
a
mic
jack
to
a “low input”
in
the
subordinate device.
If your subordinate device is with general input socket (e.g., LINE IN, AUX IN
, etc), please set ”impedance” at “HI” to avoid too low volume output
-
.
AF Impedance Selection (HI / LOW Control)
Remark: AF Impedance Selection only controls
Unbalanced AF Output (6.3 mm jack).
ANT
AF OUT
LOW/HI
DC INPUT
12 15V/1A
