Okayo Portable PA System
Okayo Portable PA System
Controls and Operation
1.
Power switch
2.
VOICE PRIORITY indicator LED
3.
VOICE PRIORITY button
When activated LED (2) will illuminate
4.
MASTER volume knob
5.
TONE control knob
6.
Battery meter
7.
DC IN socket
8.
CHR OUT (5V Charger C 7316)
9.
AUX OUT 3.5mm Ø
10.
AUX IN 3.5mm Ø
11.
AUX IN volume knob
12.
MIC IN (wired) volume control
13.
MIC IN (wired) 6.35mm Ø
UHF Wireless Receiver C 7317
1.
LCD window
2.
Antenna A and Antenna B indicator LED
3.
RF signal indicator LED
4.
AF signal indicator LED
5.
Sync button
6.
Channel up/down buttons
7.
Receiver power on/off and volume control
Operation
Turn the receiver power on/off control (7) clockwise until you feel a click. A text of will appear on the LCD
window for about two seconds followed by a channel number. To turn it off, just turn the control counterclockwise until
you feel a click. A text of will appear on the LCD and disappear after a few seconds.
How SYNC works
function can find a clear channel and assign it to a transmitter that is within range. Just turn on your
microphone or transmitter and press the SYNC button. During the synchronisation process the RF LED indicator will
blink for a few seconds.
4
9
10
11
13
12
2
3
4
5
1
7
6
8
