Okayo Portable PA System
4
Operation
Power & Charging Functions
The portable PA system is powered by 240V AC mains via IEC socket (see figure 2 for location) or via the internal bat-
teries. When operating for the first time the internal batteries will require charging for up to 8 hours. Charging will
occur whenever the unit is plugged into the 240VAC mains supply. The charge status indicator (shown in figure 2) will
illuminate red when charging. Once charging is complete the indicator will illuminate green.
When in use without mains power the LED built into the power switch provides indication of battery status:
100% to 20% capacity:
red illumination.
<20% capacity:
flashing red illumination
Level Adjustments & Input/Output Connection - Figure 3.
System inputs, outputs and levels can be controlled via this module. Master volume adjusts overall system level from
all inputs (ie: UHF, CD/MP3 player, RCA stereo input and wired microphones). Treble and bass controls affect all sys-
tem inputs. When set to half way sound equalisation will be flat.
RCA stereo jacks are provided for an external audio source. This allows connection of a CD player, iPod or other audio
source.
An RCA output is provided for use with external zone amplifiers or other PA systems if required. This output signal is
combined from all inputs (ie: UHF, CD/MP3 player, RCA stereo input and wired microphones).
Pressing the voice priority (VOX) button turns the voice priority on. The red LED will illuminate. This will mute music
output automatically when any microphones are in use.
Figure 3: Controls
1.
Treble
2.
Bass
3.
Line in volume
4.
Aux in volume
5.
Mic 2 volume
6.
Mic 1 volume
7.
Master volume
8.
VOX priority button
9.
Line input/output RCA
10.
Bluetooth/Aux input/output
3.5mm
11.
Mic 2 input 6.35mm
12.
Mic 1 input XLR/6.35mm TRS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.