Okayo Portable PA System
Okayo Portable PA System
Controls and Operation
1.
MASTER volume control
2.
TREBLE tone control
3.
Bass tone control
4.
Battery meter
5.
VOICE PRIORITY button
When activated LED (6) will illuminate
6.
VOICE PRIORITY indicator
7.
AUX IN volume control
8.
AUX IN 3.5mm Ø
9.
AUX OUT 3.5mm Ø
10.
MIC IN (wired) volume control
11.
MIC IN (wired) 6.35mm Ø, XLR combo
UHF Wireless Receiver C 7317
1.
LCD window
2.
Antenna A and Antenna B indicator LED
3.
RF signal indicator LED
4.
AF signal indicator LED
5.
Sync button
6.
Channel up/down buttons
7.
Receiver power on/off and volume control
Operation
Turn the receiver power on/off control (7) clockwise until you feel a click. A text of will appear on the LCD
window for about two seconds followed by a channel number. To turn it off, just turn the control counterclockwise until
you feel a click. A text of will appear on the LCD and disappear after a few seconds.
How SYNC works
function can find a clear channel and assign it to a transmitter that is within range. Just turn on your
microphone or transmitter and press the SYNC button. During the synchronisation process the RF LED indicator will
blink for a few seconds.
Change channel manually
Press and hold the UP or DOWN buttons (6) until the channel number is blinking.
Select the desired channel using the UP or DOWN buttons.
A selected channel number will be confirmed in 1 second if no more adjustments are made to it.
• Please complete the channel setup in one receiver first, and then a second one,
when you have more than one receiver.
• Be sure to give a different channel number to each receiver.
4