Okayo Portable PA System
Okayo Portable PA System
9
SHUFFLE:
Selects tracks randomly.
PROGRAM:
Will play programmed tracks.
MEMORY:
Will play tracks stored in memory.
A-B:
Repeat playing between A and B.
88
:
In MP3 mode the display will appear with the folder number.
888
:
Displays the current playing track number.
88:88
Displays the time for the current track playing.
Fitting Additional Modules
Fitting C 7187B UHF Wireless Microphone Receiver Module
1. Ensure portable PA is NOT connected to mains power. Disconnect all input cables.
2. Unscrew the ‘half width’ blanking panel at the top of the rear panel (see figure 2).
3. Slide the UHF wireless microphone module in, ensuring the board slots into the connector at the rear of the empty
expansion bay.
4. Screw the module into the rear panel.
Internal Layout Of Portable PA Input/Output Board
All PA models feature a blanking panel with the system power switch mounted on it (see figure 2). This panel is
replaced by the C 7189B module.
Fitting C 7189B Audio Link Transmitter
1. Ensure portable PA is NOT connected to mains power. Disconnect all input cables.
2. Unscrew the blanking panel and disconnect the power cables from the main board.
3. Locate switch SW200 on the main board inside and ensure it is set to NORMAL (factory default).
4. Locate jumpers J201 and J204 on the main board inside. Connect the power cable for the wireless link transmitter
to J201 and the signal cable to J204.
5. Screw unit back together.
SW200
J201
J204
CON204
Normal
Effect