Safe use
6
NOTICE!
This device is designed to load 3680W(230V16A current
)
in maximum, but
sometimes your household outlets are only designed for 2300 watts(230V10A),
under this case, if you plug appliance load with 3000W output, the current
draw is under Pm90, so it can pass the Pm90 freely but will cause the outlet
overload. It’s VERY DANGEROUS ignoring the outlet socket overload power.
Take TWO actions to prevent that!
1. Make sure to check the outlet overload power before plug the appliance
on through Pm90.
2. Make an overload setting once you choose the plug, for example your
target outlet is 10A overload current. Plug the Pm90 to the outlet, and
Do the overload setting on Pm90. please refer to overload setting
Please be aware that this device place a role as a bridge between household
outlet and appliance, so the appliance is connected directly to outlet in
some meaning. so the appliance wattage limitation should follow what outlet
allow!
2
6
VALUE/+
DISPLAY/-
SET/OK
HISTORY
RESET
Check your outlet overload current
Set overload current on Pm90 base on outlet
