GB
| Operating Instructions
GB-2
Electric Hedge Trimmer
Technical data
HS 4518
Operating Voltage
V~
230-240
Nominal Frequency
Hz
50
Nominal Consumption
W
600
No-load Speed n
0
min
-1
1500
Cutting length
mm
450
Cutting capacity
mm
20
Weight (without flex)
kg
3,2
Noise Pressure Level L
pA
according to 2000/14/EG
dB (A)
87,87 K 3,0 dB (A)
Vibration according to EN 60745
m/s
2
2,825 K 1,5 m/s
2
Class of protection: II / DIN EN 60745/VDE 0740
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply
with the provisions of the German Product Safety Act.
Emissions
-
The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
-
The specified vibration emission value can also be necessary for the assessment of work breaks are used.
-
The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention:
Noise protection! Please observe the local regulations when operating your device.
Summary of Contents for HS 4518
Page 3: ...2 2 3 4 A B 5 C ...
Page 4: ...7 8 3 9 8 mm 6 ...
