4
For daily care
Resin part
●
Wipe off with a soft cloth dampened with
water.
●
When it gets dirty, moisten the cloth with thin
neutral detergent and squeeze it hard to
wipe.
Wipe clean with a damp cloth. Be sure to
wipe detergent completely and wipe again
with a dry cloth to dry it.
Aluminium part
●
Wipe off with a dry soft clean cloth.
●
If moisture is collected or substances such
as fingerprints or sebum are adhered,
wipe it off immediately. Leaving moisture,
liquid, fingerprints, or sebum on the surface
accelerates oxidation of the aluminum part
and deteriorates gloss and texture.
Wooden part
●
Wipe gently along the grain with a soft, clean,
dry cloth.
●
If the product becomes noticeably dirty,
remove the dirt using a soft cloth dampened
with water, then use a dry cloth to absorb
water residue.
●
For a more thorough cleaning we recommend
using a mild cleaner (thin neutral detergent).
〈
Caution
〉
●
Do not use the following as they may damage
the coating.
◎
Thinner, benzene, alcohol , lacquer, oil,
vinegar, boiling water, polisher, etc.
●
Frequent wiping with a damp cloth may cause
cracking of the coating. It is recommended
to use a dry soft cloth or our wiping cloths for
daily care.
●
If water has spilled onto the surface, wipe it
away with a dry, soft cloth.
●
If you have spilled tea, coffee, detergent,
chemicals, or the like onto the product, wipe
them away immediately.
●
This instruction manual is very important, so
store it in an easily accessible location.
●
Frequent maintenance of the product during
its use is the key to making it at last a long
time. Immediately request inspections and
repairs (fee required) from our company when
the warranty period has expired.
●
If the product has become unsteady due to
loosening of the bolts or screws during use,
retighten them immediately.
●
Do not use knives or other
sharp items directly on the
surface of the tabletop.
This could lead to injuries
or damage to the product.
●
Do not directly place hot
items onto the product.
This may leave white markings on the surface.
●
Do not use in places exposed to vapors. This
could cause rusting.
Operating Precautions and Maintenance
Product code label
This product is affixed with a product code label inscribed with the product code and the like.
Check the contents of the label when making inquiries or reordering the same kind of product.
Materials
Part
Main materials
ABS edge tabletop
Surface materials
Decorative melamine laminate
Core materials
Particleboard
Rear surface materials
Melamine resin plate
Edging materials
ABS resin
Supporting base
ALM molded product
Operating lever
ＡＢＳ
〉ＡＢＳ〈
Arm
ALM molded product
Props
Steel pipe
Legs
Painted legs
ALM molded product
Polished legs
−
Caster
Main unit
Polyamide
〉ＰＡ〈
Wheel outer
circumference part
Polyurethane
Axle part
Steel
>
○○
< indicates the materials of the parts. This information is useful when recycling.
Please understand that product specifications might change without prior notification when improvements are
made to the product.
GD2785
2017-07
INTERNATIONAL SALES & MARKETING DIVISION
2-14-27, Akasaka, Minato-ku, Tokyo 107-0052, JAPAN
Tel : +81-3-5561-4085 Fax : +81-3-5561-4086
http:
//
www
.
okamura.jp
/
OKAMURA CORPORATION
Instructions to Extend the Life of Product
Please follow instructions below. Failure may cause serious damage to the product and
Okamura will have no responsibility for any damages.
