Okamura Arco 865JAT Assembly & Instruction Manual Download Page 15

14

15

2

Movable divider

How to use movable divider

Common

Stopper

Lower the stopper on 
the right side.

Stopper

Raise the stopper on 
the left side.

The movable divider can be installed to the shelf units 
(upper) and (lower).
Insert  it  from  the  notch  part  in  the  shelf,  and  slide 
laterally to install.

How to remove and install drawers

How to remove drawers

The drawers can be removed by opening the drawers fully and pulling out the drawers while pushing the stopper on the rail part.
* Note that the rail stoppers on the right and left sides are different in pushing direction.

Note that, when you touch the edges of the rails, grease 
may adhere to your hands.

CAUTION

CAUTION

When installing and removing the rails, be careful not to 
get your fingers caught.

Side panel rail

Drawer rail

Side panel 

Drawer

How to install drawers

 Pull out the slide rail of the side panel rail, align the ends of 

the right and left rails of the drawer with the slide rail and 
insert.

 Strongly push in as is until the drawer front panel 

contacts the side panel.

* Strongly push in until the front panel contacts the side panel.

CAUTION

CAUTION

CAUTION

CAUTION

When installing and removing the rails, be careful not to 
get your fingers caught.

Note that, when you touch the edges of the rails, grease 
may adhere to your hands.

When inserting the drawer for the first time, it may feel 
hard, however, push in to the end as is.

Check  if  the  rail  inserting  position  is  correct,  and  then 
push the drawer. If the drawer is pushed in with the rails 
misaligned, the rails may be broken.

Summary of Contents for Arco 865JAT

















Reviews: