4
5
b
b
C
2
3
5
4
（
）
6
7
Installation of connecting bolts
❶
Screw the single-end connection
bolt of into the rear panel of
the upper unit to install.
(2 locations)
❷
Screw the single-end connection bolt of into the
side panel of the upper unit to install. (3 locations on
the right and left sides)
* The height is three-stage selectable. See on page 5
for reference of installation height.
* Make sure to install the insert nuts at the same height of
upper, middle and lower position.
Rear panel
Side panel (right)
Side panel (left)
Upper
Screwing the single-end connection
bolt of by turning clockwise
b
b
b
b
b
b
Fixation of fixed shelf plate
and rear panel of upper unit
❶
Install the shelf plate and rear panel of the upper unit and securely
tighten the screw-type connector. (2 locations)
Fixed shelf plate
Screw-type connector
Securely
tighten.
Rear panel
Installation of side panel
❶
Install the right and left side panels to the shelf plate
assembled in , and securely tighten the screw-type connec-
tor. (6 locations)
* The height of the shelf plate is three-stage selectable depending
on a position where is installed to the side panel. Determine
the height based on the desk to be aligned and the diagram.
■
Height of shelf plate and type of desk to be aligned
Screw-type connector
Shelf plate
Height 78cm (Pierna)
Height 76cm (Ugo, Novel-L, Sorano, Prettia-L)
Height 73cm (Arco, Novel-E, Tenuto, Prettia-E)
Securely
tighten.
Connection of upper
and lower units
❶
Screw the both-side connecting bolts of to connect the
upper unit and lower unit. (4 locations)
* The upper unit can be
installed backwards.
When installing the upper unit
on the side of the desk for use,
install it backwards.
Installation of center divider
❶
Insert the dowels on the center divider into the dowel holes on
the lower unit shelf plate, and fix with the connecting bolt of
from the back side. (1 location)
* The center divider can also be installed to the lower unit bottom
plate.
Installation of movable shelf plate (small)
❶
Insert the shelf plate receiving dowels of into the lower unit
side panels and screw fixing divider to install. (8 locations)
❷
Place the movable shelf plate (small) on .
Movable shelf plate
(small)
d
Lower unit
Center divider
Dowel
a
Screw-type
connector
Securely
tighten.
* Usable at a stage where the center divider is installed
[About screw-type connector]
Screw-type connector
The screw-type connector is
tightened by turning clockwise.
The screw-type connector is
loosened by turning counterclockwise.
Screw-type
connector
Single-end
connection bolt
(Embedded into the members)
When the arrow is set to the single-
end connection bolt, the connecting
bolt is inserted (removed).
Arrow
[About connection bolt]
Single-end
connection bolt
When screwing the
connection bolts into
the insert nuts, make
sure not to tighten
excessively.
The insert nut may be removed,
or the head of the connection bolt
may be broken.