
46
EN
OPERATION
Drying
• Press
the
Start
button. The tumble dryer will
operate according to the pre-set program. The
Drying
indicator lights up (fi g. 8, arrow
1
).
•
The remaining drying time is shown in the display.
•
At the end of a drying cycle the laundry will run
through a 10 minute cooling cycle. The
Cooling
indicator lights up (fi g. 8, arrow
2
).
•
The tumble dryer will stop operation
automatically when a drying cycle ends. The
End
indicator will light up (fi g. 8, arrow
3
).
•
Open the tumble dryer door and take out the
laundry.
•
If the laundry is not removed, the tumble dryer
will start the anti-crease protection automatically.
During the anti-crease protection cycle, the
tumble dryer’s drum will run at intervals to keep your laundry loose.
Recommendation:
Remove laundry immediately when the device has fi nished the
selected drying program.
Turning off the tumble dryer
•
Set the program dial to
0
(fi g. 9). Disconnect the
power plug from the wall socket.
•
Lightly push on the tumble dryer’s door to open
it. Remove the dried laundry.
Tips for saving energy
•
Spin the laundry as dry as possible in the washing machine before putting it into
the tumble dryer.
•
Avoid overloading the tumble dryer.
•
Shake the Iaundry and make it loose before loading it into the tumble dryer.
•
Regularly clean the interior of the drum with a moist cloth.
•
Choose a proper drying program. Make sure the laundry is not dried longer than
needed.
•
Clean the fi lters after every drying cycle.
•
Clean the condenser once a month.
9
8
OTD 202_A5_130723 (1.5).indb 46
OTD 202_A5_130723 (1.5).indb 46
22/7/13 4:13 PM
22/7/13 4:13 PM