18
EN
INSTALLING / REPLACING REMOTE CONTROL BATTERY
1
Push in direction of arrow and slide the battery holder out.
2
Insert 1x battery (type CR2025, 3 V
) in the battery compartment. Make sure the polarity is
correct as indicated.
CHARGING BATTERY
3
Set the ON/OFF switch to the OFF position.
During charging:
Charging indicator lights up red.
After charging (battery full):
Charging indicator lights up green.
Note: Charge the battery at least 4
hours
before
using the appliance for the first time.
When built-in battery power is low:
Low Battery
message appears on the screen.
4
Plug the power adapter into the
DC IN 9-12V socket.
5
Connect the power adapter to a suitable
electrical outlet or...
6
... connect 12 V car adapter to vehicle's 12 V
cigarette lighter socket.
This product can be powered by 12 V only.
DO NOT connect to vehicles with 24 V circuit.
CONNECTING MONITOR 2
7
Use the provided AV/Power cable to connect monitor 2 to monitor 1.
A. Monitor 1 AV OUT
Monitor 2 AV IN
B. Monitor 1 DC OUT
Monitor 2 DC IN
Note: Both monitor 1 and monitor 2 can be also used to display A/V signals from external
appliances via AV IN socket.
CONNECTING HEADPHONES
8
Connect provided earphones to the headphone jack of either monitor 1, monitor 2, or both.
ADJUSTING VOLUME
9
Set desired volume on either monitor or on the remote control using VOL+ and VOL- buttons.
DISC PLAYBACK
10
Set the ON/OFF switch to the ON position.
11
Slide the OPEN switch to open the disc compartment and insert a compatible disk
(DVD, VCD, or CD).
12
Close disc compartment. Playback starts (in most cases) automatically.
Note – If the playback does not start automatically: Press SOURCE button and choose
DVD
mode. Confirm
with ENTER. If no disc is inserted, the display shows
NO DISC.
Use the navigation buttons
to select the desired menu item and press ENTER to confirm.
OPD700D_A5_140328 (1.2).indb 18
28/3/14 8:08 PM
