23
４
-
１
. Setting 2
6. PTT mode
Set the operation when PTT SW (SW8 or CN4 Rch) is pressed.
TGL: Transmission and reception change each time the
button is pressed
MOM: Transmission while it is pressed.
5. Debug Disp
Set whether or not to display the debugging message (the green
character string at the upper left of the spectrum display) on the
"transceiver" screen.
Tranceiver Debug display
7. TX F Limit
Limit the transmission frequency range so as not to transmit by
mistake outside the amateur band (right table).
Set it "OFF" only when you want to transmit test on another
frequency experimentally. In that case please do not test with the
antenna, test with a dummy load.
Be sure to return "ON" when the test is finished.
TX frequency range limit
{ 135700, 137800 }, // 135kHz
{ 1810000, 1825000 }, // 1.8MHz
{ 1907500, 1912500 },
{ 3500000, 3575000 }, // 3.5MHz
{ 3599000, 3612000 },
{ 3680000, 3687000 },
{ 3702000, 3716000 }, // 3.8MHz
{ 3745000, 3777000 },
{ 3791000, 3805000 },
{ 7000000, 7200000 }, // 7MHz
{ 10100000, 10150000 }, // 10MHz
{ 14000000, 14350000 }, // 14MHz
{ 18068000, 18168000 }, // 18MHz
{ 21000000, 21450000 }, // 21MHz
{ 24890000, 24990000 }, // 24MHz
{ 28000000, 29700000 } // 28MHz
4. Test SG
On the "transceiver" screen, you can set whether to output the
TX/RX test signal with SW4 or not. If OFF, no test signal is output
even if SW4 is pressed. It is good to turn it OFF when the test is
finished.
