PAGE 17
© 2022 OJ Electronics A/S
Choose which floor sensor type is used with the thermostat.
1. Tap the sensor type installed in the floor.
2. Tap the “
Arrow Right
” button to continue.
The thermostat is calibrated for use with standard sensors from OJ Electronics:
ETF-110/99C - 10kΩ (US)
ETF-144/99T - 12kΩ (CA)
If you want to use the thermostat with the room sensor only, you must complete
the Setup Wizard using “
Default
” as the floor sensor type before going to:
Installer Settings/Sensor Application
and choosing “
Room
”.
If you want to change the value after finishing the Setup Wizard, the value can be
changed later from the Installer Settings menu
7.6 Set the sensor type
1
2
>
<
Contents
