OJ Electronics ADG4 User Manual Download Page 50

Page: 50 / 62

PAGE 50

10.4.3 Sensor Application 1/2

This option allows you to choose which sensor is used to control the heating
system.

• Floor:

With this setting, the floor sensor controls the heating system.

• Room/Floor Protection: With this setting, the room sensor controls the

heating system while the floor sensor limits heating according to
the temperature limits set under

Menu/Installer Settings/Floor

Protection

• Room:

With this setting, the room sensor built into the thermostat controls
the heating system.

Note! Floor Protection is not active while using the Sensor Application
“

Room

”.

Note that certain menu options will be grayed out and inaccessible as
they are only applicable with the floor sensor.

Floor limit temperatures are set under

Menu/Installer Settings/Floor Protection

Note that changes made under “

Sensor Application

” do not influence the “

Floor

Protection

” settings.

Contents

Summary of Contents for ADG4































































Search results

Summary of Contents for ADG4

Reviews:

Related manuals for ADG4

Brands by name

Popular brands

OJ Electronics ADG4, User Manual

Search results

Summary of Contents for ADG4

Reviews:

Related manuals for ADG4

Brands by name

Popular brands