Installation and User’s Guide
http://www.oickorea.com
Tel: 82-70-7510-2809 / Fax: 82-70-8240-4403 / Email: [email protected]
pg5
TENSION
ADJUSTMENTS
VESA 100
: Secure the VESA 75/100 mounting bracket to the VESA 75 Using the four M4 x 10
Phillip screws. Raise and secure your monitor to the plate that has the VESA 100 now on you CMK-
01 adapter and use the four (4) M4 x 10 (mm) Phillips screws (supplied) and a Phillips screwdriver.
(Do not use other tools other than a Phillips screwdriver to prevent damage to the monitor or
mounting points).
CAUTION:
Do not over tighten the screws to the monitor failure to do so could result on
damaging the monitor or the mounting points. See figure 4.
Figure 4
(4) M4 x 10mm
Phillips Flat Head screws
Adapter Plate
75 MM /
100 MM VESA
plate
(4) M4 x 10
Phillips
M6 X 8mm Set
Screw
Swivel tension
Tilt tension
