Ohmic instruments UPM-DT-1000PA, User Manual

Page: 4 / 24

ii
CAUTION - SERVICE
The UPM-DT-xPA Series is intended to be
serviced only by authorized service personnel.
Troubleshooting and service procedures should
only be performed by qualified technical
personnel.
WARNING - USE
The UPM-DT-xPA Series is intended for testing
only and should never be used in diagnostics,
treatment or any other capacity where it would
come in contact with a patient.
CAUTION - MODIFICATIONS
The UPM-DT-xPA Series is intended for use
within the published specifications. Any
application beyond these specifications or any
unauthorized user modifications may result in
hazards or improper operation.
CAUTION - INSPECTION
Inspect the UPM-DT-xPA Series before each use
for wear. It should be serviced if any parts are in
question.
CAUTION - ENVIRONMENT
Exposure to environmental conditions outside
the specifications can adversely affect the
performance and accuracy of the UPM-DT-xPA
Series. If the unit is outside the Operating
Specifications, allow it to acclimate to specified
conditions for at least 30 minutes before
attempting to operate it.