ohmex SEW 3800, Instruction Manual

Page: 78 / 80

68
SEW 3800
EN
INCONVENIENCES AND POSSIBLE SOLUTIONS
Problem Possible Cause Possible solution
Wrinkles or creases 1. Wrong needle size.
2. Excessive adjustment of
stitch length.
3. Overtensioned thread.
1. Choose a needle suitable
for the thread and weft.
2. Choose the sewing nee-
dle with the right specifi-
cations.
3. Reduce the tension.
Irregular stitches or fabric 1. Poor quality thread.
2. Incorrect threading of the
coil;
3. Jammed fabric.
1. Choose a quality thread.
2. Thread correctly.
3. Do not pull and drag the
fabric while sewing.
Thread jam 1. The upper thread has
been hooked to the hook
plate.
2. The upper thread was
hooked onto the spool of
the coil thread.
1. It is caused by incorrect
threading. Cut the up-
per part of the thread,
remove the spool and
smooth the hook thread;
2. Place the cover under the
foot during sewing.
ENVIRONMENTAL DISCLOSURE / DISPOSAL AT END-OF-LIFE
“In compliance with the directive 2011/65/EU related to waste disposal (RoHS) and with the
Directive 2012/19/EU (RAEE) on electronical and electric equipment waste” the crossed out
wheelie bin symbol on the equipment nameplate or on its batteries, indicates that the product
and the batteries at the end of their useful life must be collected separately from other waste. The
user should therefore, take the product to an appropriate recycling centre for electrical and electronic
waste, or hand it to the dealer when buying a new equipment. Dead batteries must be removed from
the product, separately collected and delivered free of charge to an appropriate batteries collection
centre provided by Municipalities and by shopping centres.
For more information please contact the Local Council or the Municipality. Proper separate collection
for the deliver of the equipment to recycling, to treatment and environmentally compatible disposal
helps avoid possible negative effects on the environment and health and promotes the reuse and/or
recycling of materials that make up the equipment. Illegal dumping of the product by the user involves
the application of administrative sanctions provided by current laws and regulations.
Packaging waste must be differentiated and taken to appropriate collection centres according to the
current laws on the territory on waste separate collection.