100
EN
AIR 9000 CON
CLEANING
Water drainage
•
Turn the appliance off and disconnect the plug from the socket.
•
Place the appliance near a water unloading point or position a container in the rear
part of the appliance.
•
Remove the cover (11)
•
Remove the cap (10); water immediately leaks from the joint.
If desired, connect a small hose (not supplied) to the unloading joint to better
direct water.
☞
Do not perform this operation on wooden floors, on carpets or
wall-to-wall carpeting. Make sure that leaking water doesn’t
enter in contact with delicate objects, with cables or power
sockets.
•
Let all water leak. It is not necessary to tilt the appliance.
•
Correctly reposition the cap (10) and the cover (11).
•
Insert the plug in the socket.
•
The appliance will emit an acoustic signal indicating that it is in stand-by mode. The
display shows the detected ambient temperature.
•
Press the ON/OFF button (20 or 40) to start the appliance.
10
10
11
Summary of Contents for AIR 9000 CON
Page 2: ......
