![OHM ELECTRIC DUST CUBE ODU-080DSA-AT3 Instruction Manual Download Page 6](http://html1.mh-extra.com/html/ohm-electric/dust-cube-odu-080dsa-at3/dust-cube-odu-080dsa-at3_instruction-manual_4504292006.webp)
-
6
-
3.開梱時の確認
/
Unpacking check
①本体側面のシールで型式を確認し、製品に間違いがないことを確認してください。
Make sure that label on the product shows the correct model.
②不足部品、破損がないか確認してください。
製品の間違い、不足部品、破損がございましたら、販売店、メーカにご連絡ください。
Make sure that the supply includes all items and there is no damage with any of them.
Should any problem be found, please contact your supplier immediately.
4.取付方法
/Installation
注意
/Caution
排気口の周囲は100mm以上の空間を確保してください。また排気口を塞がないでください。
→モータ焼損、電子部品の故障の原因となります。
Leave at least 100mm of clearance around the exhaust port. Do not block the port.
→
Failure to this may lead to motor burnout or breakdown of electronic components.
また、メンテナンス及び円滑な空気循環のために周囲に350mm以上の空間を確保してください。
(ODU-1000DSA-AT3の場合は、フィルタカバー開閉のため、400mm以上必要です。)
本体を床からの高さ200mm~2000mmの範囲で設置してください。
Leave at least 350mm of clearance around DUSTCUBE for maintenance and inspection
purposes and for assuring good air circulation.
(For ODU-1000DSA-AT3, at least 400mm clearance is required for opening and closing the
filter cover.)
Install the unit at 200mm to 2000mm height from the floor.
●ODU-080DSA-AT3
●ODU-1000DSA-AT3