Shock absorber for BMW R1200R & R1200RS
BM 511
Mounting Instructions
otee!
1
Please note that there can be small differences
between your product and the images in
these instructions.
otee!
1
Please note that during storage and transport,
especially at high ambient temperature, some
of the oil and grease used for assembly may
leak and stain the packaging. This will not cause
damage to the product, wipe off the excessive
oil or grease with a cloth.
otee!
1
Before you install this product, check the kit
contents. If anything is missing, please contact
an Öhlins dealer.
Warninge!
⚠
Before you install this product, read the Öhlins
Owner’s manual. This product is an important
part of the vehicle and the vehicle stability.
Kit contents
Description
Part o
Pcs
Shock absorber
BM511
1
Washer Ø8
00153-01
2
Tie-rap
00231-01
2
Nut M8
00430-05
1
Screw M8x50
01046-25
1
Sticker “Memo notes”
01180-01
1
Sticker “ÖHLINS” wh/tr
01185-01
2
Sticker “ÖHLINS” bl/tr
01185-04
2
Owner’s manual
07241-02
1
otee!
1
This product can be used on a vehicle equipped
with Dynamic ESA. However, the Dynamic ESA
front fork will not function correctly when the
Dynamic ESA shock absorber is disconnected.
Therefore, it is recommended to also install an
Öhlins cartridge kit. An error code and a warning
light will appear in any circumstance. Contact an
Öhlins dealer for advice