2
Note!
Recommendation! Before installing the Öhlins
shock
absorber:
• Clean the vehicle thoroughly
• Adjust the length of the shock absorber (check
the headlight angle after adjusting the length!)
6
Attach the Öhlins shock absorber to the link.
Install the Öhlins shock absorber and the link
in the same way as the original unit. Use the
original screws.
Note!
Lower the motorcycle so that the shock
absorber is sligthly compressed, before
tightening the screws.
7
Reinstall the right side exhaust guard. Make
sure that all removed parts are installed in the
same way as they were before the installation.
Warning!
Make sure that all screws are tightened to the
correct torque and that nothing fouls or restricts
movement of the shock absorber when the
suspension is fully compressed or extended.
