2
MOUNTING INSTRUCTIONS
1.
Put the motorcycle on the center stand so
that the rear wheel barely touches the ground.
Make sure the motorcycle is in a stable
position.
2.
Open the seat
Ⓐ
by using the ignition key.
Warning!
It is advisable to have an Öhlins dealer install the shock
absorber.
Warning!
If working on a raised vehicle, ensure it is securely
supported so that it will not tip over.
Note!
Before mounting this product clean the vehicle
thoroughly.
Note!
When working on this product, always see the Vehicle
Service Manual for vehicle specific procedures and
important data.
A
