9
Charging the Vacuum Pump Battery
1. Remove the cap from the charging port on the Vacuum Pump.
2. Insert the charging plug into the charging port as follows:
a) Gently insert the plug into the port, holding the black plastic
portion of the plug, with just enough force to feel the plug touch
the port.
b) Align the green alignment marks on the charging port and the
charging plug.
The charging plug can only be inserted into the Vacuum
Pump charging port in one orientation. Forcing the plug will
damage the plug, will possibly damage the vacuum system,
and will void the warranty.
3. Plug the charger into a power outlet. The
blue
light on the two-pronged
adapter will light, followed by the
green
LED. The fob will display the
battery charging
indicator.
If the
green
LED
does not light, press and hold the
reset button
until
the light comes on.
4. When charging is complete, the
green
LED
will flash. Disconnect
the power cord from the Vacuum Pump and from the power outlet.
charging port
Charger
Vacuum Pump
To
AC
outlet
Green LED
SOLID = charging
FLASHING = charged
charging plug
reset button
Align the
green
mark on the plug
with the
green
mark on the port.
Overview
charger node