5. Lift one side of the tent and attach the legs (with base plates) and insert the pins. It is recommended that two people be available
when lifting the frame to install legs.
6) Take the Mast Insert
and insert it into the 3-way
crown from the Top
of the
6-way Center Crown.
11) Push the square mast up
through the High Peak Ridge
Top T from the bottom.
7) Secure the Mast Insert to
the center crown with the
strap and buckle provided
so the insert doest move
when you insert the mast
later.
12) Push the removeable mast
top into the hole in the center
of the tent, then insert the top
piece back into the mast and
secure wuth a canopy pin.
8) Remove the top cap
from the round End Mast
and insert the mast into the
Mast Insert from the bottom
(underneath the tent).
13) Push the mast up until the
holes in the bottom of mast
align with the holes in the
bottom of the top T
.
9) Take the removable mast
top with pin, insert pin
through the hole in tent top,
then insert the top piece into
the mast and pin in place
with the canopy pin.
14) Secure mast to Top T with
canopy pins.
10) Next push the mast all
the way up untin thetwo
holes in the Mast Insert
align with the two holes at
the bottom of the mast. Se-
cure with two canopy Pins.
