5. Lift one side of the tent and attach the legs (with base plates) and insert the pins. It is recommended that two people be available
when lifting the frame to install legs.
6) Push the square mast up through one of the 3-way
crowns on each end of tent from the bottom.
7) Push the removeable mast top into the hole in the
center of the tent, then insert the top piece back into the
mast and secure with a canopy pin
8) Push the mast up until the holes in the bottom of
mast align with the holes in the bottom of the 3-way
crown
.
9) Secure mast to 3-way crown with canopy pins. Re-
peat steps 6-9 for the center High Peak top T.
