Startup Wizard
9
Language
Select your preferred language here.
Regulation
The operator will be required to select the
regulation that will be followed for testing in any
specific region. This can be changed in the
Settings>Admin Menu screen if there is a need to
switch regulations.
The regulation controls all the
test parameters:
Select regulation links are listed in
Respirator Selection
Find the respirator(s) that will be used for fit
testing and toggle the on/off switch to on. If a
particular respirator has not been determined,
you may select any respirator and continue. This
can be changed later in the Settings>Setup
Respirators section.
Operators
For every test performed on the QuantiFit2, an
operator must be assigned to the record.
The
Operator screen is used to add/edit operators
in the database.
Enter one or more operator.
Additional operators may be added in the
Settings>Admin Menu section. See
for more information.
Summary of Contents for QuantiFit 2
Page 53: ...Appendix D CNP Diagram 52...
Page 108: ...Appendix D CNP Diagram 52...
