EN-6 OHAUS Valor
TM
1000W Series
4. MENU SETTINGS
Press and hold SET until [SEt-Fx] is displayed, where x:
0 = Set checkweigh limits and mode
1 = Set user settings
2 = Restore user settings to factory defaults
3 = Set tare capacity range
4.1 Checkweigh Over and Under Limits
•
Press and hold SET until [SEt-F0] is displayed.
•
Press YES to view the upper limit [000000] (or last value saved)
.
The Over LED
will illuminate.
•
Press
h
,
j
,
i
to edit the upper limit value (must be less than scale capacity).
•
Press YES to confirm, then view the lower limit [000000] (or last value saved).
The Under LED will illuminate.
•
Press
h
,
j
,
i
to edit the lower limit value (
must be minimum of 20d scale
divisions, and less than upper limit
).
•
Press YES to confirm, then view the alarm setting [rUn x], where x:
0 = Checkweigh mode is disabled
1 = Checkweigh LEDs are active, beeper will sound when result is outside the
Accept range
2 = Checkweigh LEDs are active, beeper will sound when result is within the
Accept range
3 = Checkweigh LEDs are active, beeper is disabled
•
Press
h
to step through available settings, then press YES to select.
•
Press SET to save and exit.
Note: The measuring unit of the limit values will follow the active unit (see Section
4.2).
