CHAPTER 1 GETTING STARTED
Valor
™ 2000/4000 Series Service Manual
1-3
Ohaus Corporation www.ohaus.com
1.6 SCALE OPERATION
– VALOR 4000
This section contains information on the basic operation of the Valor 4000 scale.
1.6.1 OVERVIEW OF THE CONTROLS
Figure 1-1. Valor 4000 Front Display with controls.
TABLE
1-3. Control functions Valor 4000
Button
Functions
Short Press
1
(when on): Sets display to zero
Long Press
2
(when off): Turns scale on
(when on): Turns the scale off
3
Short Press (in Menu): Selects / accepts displayed setting
Short Press: Accumulates the weight or displays the
accumulated information at 0 load.
Long Press: Toggles through active Units
Short Press (in Menu): Toggles through available settings
Short Press: Initiates an application mode specific response
Long Press: Selects active Mode
Short Press (in Menu): returns to previous settings
Short Press: Enter / clear a Tare value
Long Press: Enters User Menu
Short Press (in Menu): Quickly exit User Menu
IR Sensor
4
can be programmed to act as “touchless” button. See
the User Menu section 4.3 for the available settings.
Notes:
1 Short Press: Press less than 2.5 seconds.
2 Long Press: Press and hold for more than 2.5 seconds.
3 Press and hold the
On/Zero
Off
button until OFF is displayed, then release the button.
4 The IR sensor can be activated by a hand or other object that is placed at a
specified height above the sensor location. The sensor activation distance will vary
based on the reflective nature of the object. If unwanted activations occur due to
unique situations the sensor can be turned off.
Summary of Contents for VALOR 4000
Page 3: ......
