11
Trooper Count Scale
3.4 Library Mode
The Trooper Count scale allows the storage of part/counting data in 60 locations, designated ID 00 to ID 59. Each
location includes: part number, Average Piece Weight (APW), a pre-set tare value, over and under count values and an
accumulated piece count.
Data in the library is saved in a manner similar to a computer file. Temporary editing of the data will not affect the saved
data. When desired, the temporary edits can be saved, allowing the scale to be turned off without losing the changes.
Data in ID 00 may not be saved permanently but the data can be easily copied to another location.
The Library, ID 01 to ID 59, can be locked (see 4.9 Lockout Menu) to prevent unauthorized changes to the data. The
accumulated count will not be locked allowing it to be updated. When turned on, the scale defaults to ID 00.
3.4.2 Entering Data Directly into Library
The following example is used to illustrate how to enter data in a particular library location.
Short press on the
LIBRARY
Save
button.
Short presses on the
M+
or
M-
buttons will display
library locations which are already used.
Using the numeric keys, enter the desired library num-
ber. The sample shown is an empty location, ID 22.
Press the
Enter
button to accept ID 22.
Press the
Enter
button, to edit the part number or press
M+
to skip.
kg
g
lb
oz
Net
B/G %Ac
T
PT APW MR
M
<
>
PCS
WEIGHT
DATA
COUNT
BLINKING
BLINKING
kg
g
lb
oz
Net
B/G %Ac
T
PT APW MR
M
<
>
PCS
WEIGHT
DATA
COUNT
3.3.5 Using Keypad to Edit Counting Data
The APW, Pre-Set Tare (PT) and the accumulated count (MR) can be viewed and edited in the DATA window. While
in weigh mode repeatedly press the
Data
button until the APW indicator is lit. A new APW value may be entered via
the keypad and accepted with an
Enter
press. PT and MR can also be similarly edited.
3.4.1 Library Operation
To enter the Library, momentarily press the
LIBRARY
Save
button. A short press in Library mode will exit to weigh
mode.
M+
and
M-
buttons advance through the blinking choices.
The
Enter
button accepts the blinking choice.
The
Data
button returns to the previous choice.
The
Clear
button will clear blinking data or back space during data entry.
Three rapid beeps indicates an error, an improper button press or data value.
Summary of Contents for TROOPER COUNT
Page 4: ......
