T51 Indicators
Quick
Start
Guide
T51 Indicators
Quick Start Guide
ii
Ohaus Corporation www.ohaus.com
SAFETY PRECAUTIONS
For safe and dependable operation of this product, please comply with the following
safety precautions:
•
Verify that the input voltage printed on the power Adapter and the plug type matches
the local power supply.
•
Make sure that the power cord does not pose an obstacle or tripping hazard.
•
Disconnect the product from the power supply when cleaning.
•
Do not operate this product in hazardous or unstable environments.
•
Do not drop loads on the pan.
•
Use only approved accessories and peripherals, as available.
•
Operate the product only under ambient conditions specified in the Instruction Manual.
•
Service should be performed by authorized personnel only.
CONTROLS
Button
Primary Function
(Short Press)
ON/ZERO
Turns the Indicator on
If Indicator is on,
sets zero.
Sends the current value to
the COM port if AUTOPRINT
is set to Off.
FUNCTION
Initiates an application mode.
Temporarily displays the
active mode’s reference data.
TARE
Performs a tare
operation.
Secondary
Function
(Long Press)
Off
Turns the Indicator off.
Units
Changes the weighing unit.
Mode
Allows changing the
application mode.
Press and hold allows
scrolling through modes.
Menu
Enter the User menu.
Menu Function
(Short Press)
Yes
Accepts the current
setting on the display.
No
Advances to the next menu
or menu item.
Rejects the current setting on
the display and advances to
the next available setting.
Increments the value.
Back
Moves back
to previous menu item.
Decrements the value.
Exit
Exits the User menu.
Aborts a calibration in
progress.
Center of Zero
symbol
Preset Tare,
Tare, Brutto,
Gross symbols
Kilogram, Gram,
Percent, Pound,
Ounce, Pound:
Ounce, Tonne,
Pieces symbols
Capacity label
window
Under, Accept
& Over LEDs
Range symbol
Scale symbol
(not used)
Dynamic weighing
symbol
Battery charge
symbol
Stability symbol
Net symbol
