EN-10 STARTER 300C 300C Portable Conductivity Meter
4.4
Using the memory
4.4.1 Storing
a
reading
The STARTER 300C can store up to 30 results. Press
when the measurement has
endpointed. M01 indicates that one result has been stored.
If you press
when M30 is displayed, FUL indicates the memory is full. To store further data
you will have to clear the memory (see section 4.4.3)
4.4.2 Recalling
from
memory
Press and hold
to recall the stored values from memory when the current measurement has
endpointed.
Press
or
buttons to scroll through the stored results. R01 to R30 indicates which result
is being displayed. Press
to exit.
4.4.3
Clearing the memory
Continue pressing
or
buttons to scroll through the stored results until MRCL appears.
Then press
, CLr blinks. Press
again to confirm the deletion or press
to return to
the measurement mode without deleting the data.
www.
.com
1.800.561.8187
