Scout
SJX Balances
Additional Instructions
Scout
SJX Balances
ii
Ohaus Corporation www.ohaus.com
OPERATION & APPLICATIONS
The balance can be configured to operate in one or more Application modes.
Press and hold
Mode
key to select your Application mode.
The Scout SJX balance incorporates the following Applications:
[
wWeIGH
]
[
Count
]
[
Percnt
]
[
CHeCk
]
[
total
]
[
SPEC.Gr
]
[
Hold
]
Weighing
Parts
Counting
Percent
Weighing
Check
Weighing
Totalization
Density
Determination
Display
Hold
ADDITIONAL FEATURES
Connecting the Interface
Use an optional interface connectivity kit to
connect the balance either to a computer,
printer or OHAUS auxiliary display.
Below Interface kit accessories are available:
RS232, USB Host, USB Device, Ethernet,
Bluetooth
*
.
Interface connection on the rear of
the balance:
* Interface kits may vary according to local regulations
Weigh Below Hook
The weigh below hook is located at the reverse side of the battery cover as shown.
To use this feature, remove the red protective cover underneath for the weigh below
opening. For SJX, the weigh below hook is integrated and located under the
protective cover. For SJX/E, the weigh below hook is stored in the battery
compartment (back side of the battery cover).
INSTRUCTION MANUAL
For more detailed information about the balance,
please refer to the product instruction manual. The
instruction manual can be obtained either by
scanning the QR code or by going to the Scout SJX
product page to download it.
Go to www.ohaus.com to register your product's
warranty.
Product Page:
http://www.ohaus.com/
QR Code:
Interface connection
AC Adapter Jack
Security slot
Weigh below protective cover
Weigh below hook
(SJX/E only)
Visit www.balances.com for balances, scales & calibration weights
