EN-10
SCOUT
TM
SERIES BALANCES - SKX
4.6 Additional Features
Weigh Below Hook
The Scout Balance is equipped with a weigh below hook for weighing below the balance.
The weigh below hook is located at the reverse side of the battery cover as shown below.
To use this feature, remove the red protective cover underneath for the weigh below opening.
Attention:
Before turning the balance over, remove the Pan and Pan
Support
(if present), and turn the transportation lock to “locked” position
to
prevent damage.
Figure 4-2. Weigh below
The balance can be supported using lab jacks or any other convenient method. Ensure the
balance is level and secure and that the transportation lock has been released. Power on the
Balance, then use a string or wire to attach items to be weighed.
Figure 4-3. Weigh below application
Connecting the Interface
Use an optional interface connectivity kit to
connect the balance either to a computer or a
printer.
Below Interface kit accessories are available:
RS232, USB Host, USB Device, Ethernet,
Bluetooth
®*
.
Figure 4-4. Rear of the balance
* Interface kits may vary according to local regulations
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by OHAUS is under license.
Interface
connection
AC Adapter
Jack
Security Slot
Weigh Below Hook
Weigh Below Hook installed
Weigh below opening
www.
GlobalTestSupply
.com
Find Quality Products Online at:
