EN-16
SCOUT
PRO
Parts Counting
Parts Counting is
enabled only
when PC is turned ON in the
.U.N.I.T.
menu. In parts
counting mode, there are two modes of parts counting, normal and enhanced. In
normal parts counting, the balance determines the quantity based on the average weight
of the parts in the original reference quanitity. In the enhanced mode, additional parts
can be added to the platform equal to or less than the original number. The additional
reference quantity produces a more accurate average part weight.
PRINT
Unit
(Press and hold until PC is displayed)
ON/ZERO
Off
PRINT
Unit
ON/ZERO
Off
1
1
(Press repeatedly to
change to 10, 20 or 50)
(Add parts to be counted)
Standard Parts Counting
(Clear average part weight)
(Place 50 parts)
or
Enhanced Parts Counting
(Add less than 50)
(Add parts to be counted)
Y
Y
N
NOTE
: The preceding procedure for enhanced counting can be repeated as many times
as necessary providing the quantity added is less than the original entry.
5 Scout Pro English Operation 2 71160417.p65
3/6/2003, 11:01 AM
16
All manuals and user guides at all-guides.com
