EN-4
3. CONNECTING THE INTERFACE
The PJX balance has two connectivities, RS232 port and Mini DIN.
Use the RS-232 port to connect either to a computer or a printer with a standard (straight-through) serial cable.
Mini DIN is used to connect with another accessory, as an alternative option for RS232.
Interface connections on the rear of the balance
RS232: Used to connect to PC or Printer
4. MAINTENANCE
4.1 Cleaning
Please disconnect the balance from the power supply before cleaning. Make sure that no
liquid enters the interior of the balance.
Clean the balance at regular intervals. Housing surfaces may be cleaned with a lint-free cloth slightly dampened
with water or a mild cleaning agent. Glass surfaces may be cleaned with a commercial glass cleaner.
Attention:
Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
4.2 Troubleshooting
Symptom / Display
Possible Cause
Err 8.1
Weight reading exceeds Power On Zero limit.
Err 8.2
Weight reading below Power On Zero limit.
Err 8.3
Weight reading exceeds overload limit.
Err 8.4
Weight reading below underload limit.
Ref Err
Reference Weight too small. The weight on the pan is too small to define a valid
reference weight. Add additional samples.
LowW.rEF
A warning that the reference weight is below the recommended value for accurate
parts counting. Add additional samples if possible otherwise counting continues
with diminished accuracy.
-------
Busy (tare, zero, and printing).
--
NO
--
Function not executed.
Error
Timeout
IDnr.Err
IDNR Error
5. USER MANUAL
Please read instruction manual before you use the balance, you can find it at OHAUS website,
RS232
Mini DIN
Summary of Contents for Pioneer PJX Series
Page 1: ...PJX Series Balances Quick Start Guide Quick_Start_Guide_PJX_V1 ...
Page 2: ......
Page 7: ......
