9
Setting Baud Rate
Press O/T ON, until
bd 2400 is displayed. Using the MODE OFF button, you can
select baud rates of 600, 1200, 2400, 4800 or 9600. Once you have selected the
proper baud rate for your system, press O/T ON, the display advances to
PAR no
(parity).
Setting Parity
Repeatedly press MODE OFF, to select either no, odd or E for even. Once the
desired parameter is selected, press O/T ON, the display advances to
DATA 7.
Setting Data
Pressing the MODE OFF button allows the selection of DATA 7 or DATA 8. Once
the desired parameter is selected, press O/T ON, the display advances to
STOP 2.
Setting Stop Bit
Pressing MODE OFF, you can select STOP 1 or 2. Press O/T ON, the display
advances to
STBL ON.
Setting Print Modes
The balance offers a choice of manually printing only stable or all data (STBL ON/
OFF) at any time by pressing the PRINT button or printing stable readings auto-
matically (AUTO ON/OFF). The default setting for automatic stable readings is OFF.
Only one of these may be set on at a time.
Stable Data On or Off
When
STBL ON is displayed, press MODE OFF to select ON or OFF, then press
O/T ON ,
AUTO OFF is displayed.
Auto Print On or Off
With Auto Print ON, the balance automatically prints stable data when the display
changes by at least five counts. Press MODE OFF and select ON or OFF, then press
O/T ON,
END is displayed. To save settings, press O/T ON, MENU END is dis-
played. Press O/T ON to return to weigh mode.
ENTERING THE PRINT MENU (Cont.)
SETTING PRINT MENU FUNCTIONS (CONT.)
