Explorer
®
Display Tower Mount Kit
5
11
Insert the cable plug with the security
clip open, then press the security clip
into position to secure the cable.
Route the cable through a groove in
either side of the Display,
or from the rear of the Display,
as preferred.
Pull excess cable down into the Tower
for safety. (Best practice: remove slack
and re-wrap cable around cable
guides on the bottom of the balance.)
12
Re-connect power to the Base.
Use the Level Assist feature to re-level
the Balance. (Keep the Tower foot
raised during this procedure.)
After leveling the Balance, adjust the
Tower foot so it supports the Tower
and is level with the feet of the Base.
13
To adjust the Display viewing angle:
•
Press in the two Display Adjust
buttons and move the Display.
Or…
•
Loosen the knob that secures the
Tower top and move it.
