EN-8
Defender 6000 Indicators
4. MAINTENANCE
CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING.
4.1 Cleaning
WARNING
: Electric Shock Hazard. Disconnect the equipment from the power
supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention:
Do not use solvents, harsh chemicals, ammonia or abrasive cleaning
agents.
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
4.1.1 Cleaning for i-DT61PW Model
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the housing or the control panel.
4.1.2 Cleaning for i-DT61XWE Model
Use approved cleaning solutions for the stainless-steel Indicator housing and rinse with water.
Dry thoroughly.
Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the control panel.
5. TECHNICAL DATA
Materials
I-DT61XWE Housing: stainless-steel 316
I-DT61PW Housing: polycarbonate (PC)
Display window: polycarbonate (PC)
Keypad: polycarbonate (PC)
Equipment Ratings:
Indoor use only
Altitude:
2000m
Operating temperature:
-10°C to 40°C
Humidity:
maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly
to 50% relative humidity at 40°C.
Electrical supply:
100 - 240V
～
, 0.5A, 50/60Hz (i-DT61PW); 6 x D alkaline battery (i-DT61XWE).
Voltage fluctuations:
Mains supply voltage fluctuations up to ±10% of the nominal voltage.
Overvoltage category
(Installation category):
II
Pollution degree:
2
TABLE 1 SPECIFICATIONS
Indicator Model
i-DT61PW
i-DT61XWE
Maximum displayed resolution
1:75,000
Maximum approved resolution
1:10,000
Maximum counting resolution
1:1,500,000
