Defender
™
3000
Quick Start Guide
Defender™ 3000
(with T31 Indicators)
ii
Ohaus Corporation www.ohaus.com
SAFETY PRECAUTIONS
For safe and dependable operation of this product, please comply with the following
safety precautions:
•
Verify that the input voltage printed on the power Adapter and the plug type matches
the local power supply.
•
Make sure that the power cord does not pose an obstacle or tripping hazard.
•
Disconnect the product from the power supply when cleaning.
•
Do not operate this product in hazardous or unstable environments.
•
Do not drop loads on the pan.
•
Use only approved accessories and peripherals, as available.
•
Operate the product only under ambient conditions specified in the Instruction Manual.
•
Service should be performed by authorized personnel only.
Button
Primary
Function
(Short Press)
ON/ZERO
Turns Indicator on.
If indicator is on,
sets zero.
Sends the current value to the COM
port if AUTOPRINT is set to Off.
FUNCTION
Initiates an application
mode.
TARE
Performs a tare
operation.
Secondary
Function
(Long Press)
Off
Turns Indicator off.
Units
Changes the weighing unit.
Mode
Allows changing the
application mode.
Press and hold allows
scrolling through modes.
Menu
Enter the User menu.
Menu
Function
(Short Press)
Yes
Accepts the current
setting on the
display.
No
Advances to next item.
Rejects current setting, advances
to next available setting.
Increments the value.
Back
Moves back to previous
menu item.
Decrements the value.
Exit
Exits the User menu.
Aborts a calibration in
progress.
Stability
symbol
Indicators for Zero,
Battery,
Calibration Mode,
PCs, TARE
(Battery only
on T31P.)
7-segment, 6-digit
Display
Kilogram,
Pound, &
Ounce symbols
Control Buttons
Capacity label
window
