OHAUS Courier 1000 Instruction Manual Download Page 15

Courier 1000 

 

EN-11 

FCC Supplier Declaration of Conformity 

Unintentional Radiator per 47CFR Part B 

 

Trade Name: OHAUS CORPORATION 

Model: i-C12Pxxx 

 

Party issuing Supplier’s Declaration of Conformity: 

Ohaus Instruments (Changzhou) Co., Ltd. 

Building C, No. 6 Zhengqiang Road, Xuejia Town, Xinbei District, Changzhou 

Jiangsu 213022, 

China 

Phone: +86 519 85287270 

 

Responsible Party – U.S. Contact Information: 

Ohaus Corporation  

8 Campus Drive, Suite 105 

Parsippany, NJ 07054  

United States  

Phone: +1 973 377 9000 

Web: www.ohaus.com 

 

FCC Compliance Statement: 

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment. This equipment generates, uses, 

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, 

may cause harmful interference to radio communications. Operation of this equipment in a residential area is 

likely to cause harmful interference in which case the user will be required to correct the interference at his own 

expense. 

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 

authority to operate the equipment. 

 

LIMITED WARRANTY

 

OHAUS products are warranted against defects in materials and workmanship from the date of delivery through 
the duration of the warranty period. During the warranty period OHAUS will repair, or, at its option, replace any 
component(s) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to 
OHAUS.  This warranty does not apply if the product has been damaged by accident or misuse, exposed to 
radioactive or corrosive materials, has foreign material penetrating to the inside of the product, or as a result of 
service or modification by other than OHAUS. In lieu of a properly returned warranty registration card, the 
warranty period shall begin on the date of shipment to the authorized dealer. No other express or implied 
warranty is given by OHAUS Corporation. OHAUS Corporation shall not be liable for any consequential 
damages.  
 
As warranty legislation differs from state to state and country to country, please contact OHAUS or your local 

OHAUS dealer for further details 

 

 

Summary of Contents for Courier 1000


















Reviews: