Service Manual
Page 18 of 50
3.3. Entering Scale Configuration Setup
1. When unit price is 0, Press the Manu key for around 3 seconds.
2. After hearing a long beep, the display will show "SET 1 OP".
3. Press the Tare key to go down to set 2, then press ON/OFF key.
4. Display messages: Press Seal.
5. Break the sealing located under the scale. Press the calibration button to enter the configuration,
display will show: STEP 1.
For more information on settings & scale functionality, please refer to below form.
Aviator 5000 Series:
Step
Function
Explanation
1
Country
Detail in the section “specification by country”
2
Initialize to Defaults
YES: Initialize softswitch parameters to the defaults
NO: Scale will not initialize scale softswitch parameters
3
Display comma or
period
OFF: Use a “.” in all
weight and price data
ON: Use a “,” in all weight and price data
4
Decimal Point Position Select for
Price Displays
Select the number of the digits (0, 1, 2, and 3) to be
displayed to the right of the decimal point for the unit price
and total price displays
5
No Content
6
Enable Zero Cursor
ON: Enables zero cursor
OFF: Disables zero cursor
7
Gross or Net Zero
ON: Zero cursor will be illuminated when the gross or net
OFF: Zero cursor will be illuminated when the gross weight
8
Display uuuuu’s When
ON: Show uuuuu’
s when weight is less than zero
OFF: Show negative weight when under zero
9
Tare Enable
ON: Enables tare function
OFF: Disables tare function
10
Chain Tare
Enable ON: Enables chain (multiple) tares
OFF: Only one tare per transaction is allowed
11
Keyboard Tare Enable
ON: Tare can be entered via scale numeric keyboard
OFF: The steady weight on the platter becomes the tare
12
Keyboard Tare Clear
ON: Tare can be cleared when the platter is empty
OFF: Tare can not be cleared via the keyboard
13
Accu Enable
ON: Enables Accumulator
OFF: Disables Accumulator
14
Change Function Enable
ON: Enable change function
OFF: Disable change function
15
Total Price Round
ON: Total price will be rounded
OFF: Total price not round
16
Unit price multiplication
ON: Enable this function
OFF: Disable this function
17
Hold function
ON: Enable this function
OFF: Disable this function
18
1/2LB or 100g pricing
ON: Enable 1/2lb or 100g function
OFF: Disable 1/2lb or 100g function
19*
1/4LB pricing enable
ON: Enable 1/4 lb function
OFF: Disable 1/4 lb function
20*
Switch between LB & KG
ON: Enable this function
OFF: Disable this function
* Only available in specific regions
