EN-12
Adventurer Pro
USE
Zero the balance
Place objects to be weighed on the pan.
Example shows a 200 gram weight on a 200
gram balance.
3.5 Application Modes
The Adventurer Pro balance incorporates Weighing, Parts Counting, Percent Weighing, Check
Weighing, Animal Weighing and Totalize application modes. The default setting has the weighing
mode turned on and all other application modes turned off. Before using any other application
modes, they must be turned on in the Mode menu.
3.5.1 Weighing
Use this mode to determine the weight of items in the selected unit of measure. The Adventurer
Pro is shipped with grams enabled. Before using any other units of measure, they must be
turned on in the Unit menu.
3.5.2 Parts Counting
Enter this mode to count samples of uniform weight. Refer to paragraph 3.3.4 to enable Parts
Counting.
USE
The primary display shows COUNT and the
secondary display shows CLEAR APW?
(blinking) if an APW is stored in memory. Press
No
to use the stored APW and begin parts
counting. If CLEAR APW? is chosen or if no
APW is stored in memory, an APW must be
established.
Establishing an Average Piece Weight (APW)
The current weight is shown on the primary
display and the default sample size is shown
on the secondary display.
To change the sample size, Press and hold
the
No
button to increment the sample size
through the range of 1 to 100. Release the
button when the desired sample size appears
on the secondary display.
Summary of Contents for Adventurer Pro
Page 2: ......
