EN-24
Adventurer Pro
Project ID
Used to enter a Project ID up to 10 characters.
Entering a User ID or Project ID
Enter the user or Project ID one character at a
time. The character to be entered is highlighted
by a blinking cursor (underscore). Press the
No
button repeatedly to scroll through the list
of available characters. ((space), -, 0 through
9, A through Z). Press the
Yes
button to select
the displayed character and move the cursor
one position to the right. After the tenth
character is entered, the ten character ID will
blink. Press the
No
button to change the
displayed ID or the
Yes
button to accept the ID
and proceed to the next menu item.
Time
Type
Set the type to 12 hours or 24 hours.
Set
Set the current time using the format selected
in the type menu item.
Adjust
Enter an adjustment value from -60 to + 60
seconds per day.
Date
Set the date type: M/D/Y, D/M/Y, Y/M/D,
M/Y/D, Y/D/M, D/Y/M and the actual date.
End GLP Data
Press the
Yes
button to advance to the GLP Print
submenu. Press the
No
button to return to User
ID.
3.7.9 GLP Print
Select GLP items to be printed by setting them
to On.
GLP PRINT
Time
On/
Off
Balance ID
On
/Off
User ID
On
/Off
Project ID
On
/Off
Difference
On
/Off
Name
On
/Off
End GLP Prt
RESET
Setup
RESET?
Readout
RESET?
Mode
RESET?
Unit
RESET?
Print-1
RESET?
Print-2
RESET?
RS232-1
RESET?
RS232-2
RESET?
GLP Data
RESET?
GLP Print
RESET?
Lockout
RESET?
Global
RESET?
End Reset
Setup
Select Yes to return all Setup menu items to
their factory settings.
Readout
Select Yes to return all Readout menu items to
their factory settings.
Mode
Select Yes to return all Mode menu items to
their factory settings.
3.7.10
Reset
End GLP Print
Press the
Yes
button to advance to the reset
submenu. Press the
No
button to return to Time.
4 Adventurer Pro Text pages 15 to 40.P65
4/10/2003, 6:00 AM
24
All manuals and user guides at all-guides.com
