EN-2
Explorer
®
Balance Ethernet Option Interface Kit
2. INSTALLATION
2.1 Safety Precautions
For safe and dependable operation of this equipment, please comply with
all safety precautions mentioned in this manual.
Note:
Disconnect the equipment from the mains power supply before
beginning installation.
CAUTION:
The electronics of the Option are very sensitive to electrostatic discharges. In
order to protect the components, necessary measures must be taken when the
Option is installed so as to provide protection against electrostatic discharges.
2.2 Installation procedure
Please note the following:
The interface is installed into the Display and is powered by the Base.
Follow the steps below. Refer to the Figures when performing these steps.
1
Make sure Balance is unplugged
(turned OFF)
2
Detach the Display:
press buttons on both sides to
disconnect. Then pull Display away
from base.
Summary of Contents for 83021082
Page 1: ...Explorer Balance Ethernet Interface Option Kit Installation Instructions...
Page 2: ......
Page 11: ......
