OVERVIEW OF CONTROLS AND FUNCTIONS
Button
Action
Short press: If the terminal is Off, power on the terminal; if the terminal is On, clear the data input.
Long press: Power off the terminal.
Short press: Send the current display value to RS232 port in the case where the "Communication ->
RS232 setup->Assignment->Demand" is "On".
Long press: Change the current weighing unit. Press and hold the key to scroll through the list of
enabled units. Release the key to switch to the unit selected.
Short press: Press the key to enter the Library.
Long press: Press and hold this key to change weighing modes. Press and hold the key to scroll
through all weighing modes. Release the key to switch to the mode selected.
Short press: Press the key to enter user profile.
Long press: Press the key to enter user menu.
The soft keys correspond to several icons at the bottom of the display area. These icons indicate
configuration, ID input, accumulate, exit, etc. (available in certain circumstances).
To enter ‘2’-‘9’, press the numeric button in the mode of numeric input.
To Enter ‘A’, press
2 times in the mode of uppercase input. To enter ‘Z’, press
5 times in the mode of lowercase input.
To enter ‘0’, press the button in the mode of numeric input. To enter a space, press the
button in the mode of uppercase or lower case input.
To enter '1', press the button in the mode of numeric input. To enter '#' or '/', press the
button in the mode of uppercase input. To enter '@', '_' or '&', press the button in the
mode of lowercase input.
Switch between three input modes, namely, numeric, lowercase and uppercase input.
To enter '.', press the button in the mode of numeric input. To enter '+' or '-', press the
button in he mode of uppercase or lowercase input.
Short press: When the load on the pan is within the zero range, press this key to set the display to
zero.
Short press: When a container is on the pan, press this key to store the weight of the container as
the tare value.
Short press: Enter the known weight of a container using the numeric keypad, and then press this
key to establish the preset tare value.
Short press: When a tare has been entered, empty the pan and press this key to clear the tare value.
Long press: If a preset tare has been entered, press this key to view the preset tare value.