10
12/10
Set
ting up
2.5
Connecting to mains power
The power supply is stored in a department under the scale to support
save transport.
1. Connect the supplied power supply unit to the power connection
socket on the underside of the scale.
2. Plug the power supply unit into a correctly grounded power outlet.
2.6
Turning scale on/off
To turn the scale on press the
On/Off
key.
To turn the scale off press and hold the
On/Off
key until a long beep
can be heard.
• After the scale is turned on, it runs through a short display test. All
segments and status messages briefly light up, the software version
is displayed.
• The scale is ready when the weight display appears.
2.7 Cleaning
CAUTION
Damage to the scale
Turn off and unplug the device before cleaning.
Do not open the device.
Make sure that no fluids get inside the device.
Do not use scouring powders or plastic dissolving cleaning agents
for cleaning.
Remove the weighing pan and clean it with a commercially available
household detergent.
If heavily soiled, clean the surface of the device with a damp cloth
that has been dipped in water containing a mild liquid detergent
and well wrung out.
Cleaning
OHAUS
Operator Manual Aviator 5000
Order number 72246393