INSTRUCTION MANUAL
2
REF : ST-BLASTER
SIZE : 137 x 115 x 44 cm
WEIGHT : 74,5 KG
MAX. INPUT PRESSURE : 200 BAR / 2900 PSI
POWERED BY: CO2 LIQUID (BETTER WITH DIP TUBE
INSIDE CYLINDER)
TECHNICAL SPECIFICATIONS
STORM BLASTER
STORM BLASTER is the must have machine on large events when needing to blow a large
amount of confetti in very few time. It also allows you to blow confetti where you have not
electricity supply as it runs with the only need of CO2.
ASSEMBLY AND OPERATION
1.
Remove the lid of the flight case and take out the confetti cone (1), the safety pins (4) and
the high pressure hose, provided.
2. Place the confetti cone (1) on the front of the machine so that the valve (2) and hose
(3) stay on the outside part of the machine. Select the position or angle of the cone and
secure it by inserting the safety pins (4) inside the holes of the cone for this purpose (5).
3. If you have also acquired the trolley cart to transport the STORM BLASTER, place the CO2
bottle (not included) on top of the cart platform and secure it with two slings embracing the
machine and the cylinder so that the bottle stays stand and safe.
4. Connect the CO2 bottle adaptor (6) to the CO2 cylinder.
PARTS
1. Confetti cone
2. Co2 tap/valve
3. High pressure hose
4. Safety pins
5. Holes for the safety pins
6. Co2 bottle adaptor
7. Flap gate for the confetti
