13
BLADES REPLACEMENT PROCEDURE
Ensure that Blade A, on the Bar Holder and Blade B, on the
Cutter Rod are fitted in their correct respective positions.
1. Undo the bolts and the washers that hold Blade A and Blade
B.
2. Remove dirt and clean the surfaces where the new blades
are to be fitted.
3. Fit Blade A to the Bar Holder and Blade B to the Cutter Rod.
Replace bolts and washers and tighten firmly.
If the cutting edges of the blades are chipped, cracked,
deformed, or damaged in any way, their cutting ability will
be reduced. Cutting under such conditions may cause
further damage and result in personal injury. The blades
should be replaced as a set immediately if any damage is
found.
The bolts that hold Blade A and Blade B should be
tightened regularly. If the bolts become loose the
Blades may be damaged and may cause personal
injury.
WARNING
When replacing the blades, ensure that the Battery is
removed from the tool to prevent accidental operation.
WARNING
Bolt
Bolt
Bar Holder
Blade A
Blade B
Cutter Rod
Washer
Washer
